An ISO-9001 certified company and utilize GE Six Sigma Quality Initiative.

For more information, please visit their web site at http://www.s3c.net

S3C Coating Facilities:

Automatic Horizontal Coating Line, with the flexibility to apply powder and/or wet coating systems using electrostatic technology. After coating, components are stoved and cured by passing them through a gas-fired infra-red oven and/or convection diesel-fired oven. An integral part of the coating system is a multi-stage pre-treatment facility, which includes alkali degreasing, acid etching, chromating, phosphating and de-ionised water rinses.

Automatic Pipe Coating Line , capable of handling pipes with diameters of ½"-6" and lengths of 2700 - 3200 mm. This line applies the fluidised bed method of coating with on-line curing.

Linear Automatic Pipe Coating Line , can coat pipes with diameters of ½"- 6" and of any length upto 12 meters. This line applies an innovative spray technique, and has on-line curing.





:

Rotary Coating Line , installed for coating small items and accessories for the electrical, fencing industries and for custom coating of small components.

Fluoropolymer Coating Line for applying wet system fluorocarbon (PTFE) and ceramic coatings, with high temperature curing ovens.

Quadrant" (Vibratory Screen) Automatic Coater for coating large volume, small physical size components.

Fluidised Bed Powder Coating , a custom line designed for specialised batch coating, consisting of dip-coating tanks and a 6m long oven.

Surface treatment facilities - two types - Physical and Chemical:

The Physical Treatment consists of three grit blasting units which include an automatic pipe blaster, separate chilled garnet grit-blast room and a wheelabrator tumble grit-blaster.

The Chemical Unit is a complete line consisting of alkali degreasing, acid etching, chromating & phosphating plus a dynamic rinse tank with deionized water to ensure correct and clean pre-treatment.